A burst supply line, an overflowing tub, or a storm surge under the back door doesn't wait for business hours, and neither do we. We dispatch Clovis units carrying industrial extraction pumps, air movers, and commercial dehumidifiers already loaded on the truck.
Too many Clovis, NM families have called a big national number only to get bounced through hold music before a random subcontractor shows up hours later, so Hirex Water Damage built its Clovis operation differently. Every technician on our Clovis roster is a Hirex Water Damage employee, not a gig-app contractor pulled from a random directory.
Our senior technicians are IICRC-certified and have worked everything from a clean supply-line break to a full sewage backup, so Structural Drying in Clovis isn't a side service we tacked on — it's the reason the company exists. We're fully insured and licensed to work anywhere in Clovis, NM, so you're protected from the moment our truck pulls into the driveway.
Our Clovis, NM-based equipment cache means drying gear is already close by, not stuck in a truck three states away.
Ask any Clovis property manager who has dealt with a burst supply line at 3am — the difference between a crew that shows up ready and one still loading a truck at the shop is measured in gallons of water soaking into your subfloor. That's the gap Hirex Water Damage was built to close, one Clovis call at a time.
Not every leak announces itself with a flooded floor. A lot of the worst damage we see in Clovis started small and got ignored for weeks. Here's what tells us a property needs professional attention rather than a mop and a fan:
If any of that sounds familiar, don't wait for it to get worse — call our Clovis line and we'll tell you honestly whether it's a same-day emergency or something we can schedule.
We size the Clovis response to the actual damage — a single-room extraction gets a two-person crew, a commercial loss gets the full fleet — nothing gets a cookie-cutter response.
We arrive with submersible pumps and truck-mount extractors that get standing water out of a Clovis property before it soaks deeper into the subfloor. Every extraction job includes moisture mapping so we know exactly which materials are still holding water once the visible flooding is gone.
We place industrial dehumidifiers and air movers based on actual psychrometric calculations, not a standard equipment count per room, with daily drying logs so you can see the numbers improving, not just take our word for it.
For Clovis homeowners, that means drywall removal at the flood cut line, subfloor assessment, and content pack-out for anything that can be saved, with clear photo documentation at every stage for your insurance claim.
For commercial Clovis accounts, we assign a project lead, run crews after normal hours to reduce downtime, and bring equipment sized to the actual footprint — we know a flooded lobby or a leaking unit above tenants below has to move fast.
Blackwater losses in Clovis get handled under strict Category 3 protocol: containment, PPE, antimicrobial application, and documented disposal of contaminated materials.
Every Clovis job includes a preventive antimicrobial application, and if we spot conditions that need full remediation we tell you plainly instead of quietly hoping it clears up.
Every Clovis estimate is written and explained before work begins — no vague "we'll see how it goes" pricing.
Our Clovis, NM warehouse keeps drying equipment close, which typically puts a Clovis tech at your door inside an hour.
We document everything with photos and moisture logs and work directly with your adjuster so you're not stuck translating restoration jargon.
Final moisture readings have to hit dry-standard before we consider a Clovis job done, and getting there again is on us, not you.
A short call with our Clovis dispatcher tells us whether this is a one-room job or a multi-crew response before anyone drives out.
The closest available technician is routed to your Clovis property with equipment staged and ready.
We remove standing water first, then map moisture and position air movers and dehumidifiers based on the readings.
Daily moisture checks continue until every affected material reads dry, and you get a complete report at the end.
Every Clovis job gets closed based on instrument readings, not a visual check, and we won't call it finished until the numbers say it's finished. If a callback shows lingering moisture within 30 days of a completed job, we return and correct it at no additional charge.
That's not a marketing line — it's written into every Clovis work order we issue. A repeat visit under this guarantee doesn't mean starting over — we pull the original moisture logs and pick up exactly where the last visit left off.
"We had standing water from a burst water heater and the technician showed up before I even finished mopping the entry way." — Danielle R.
"They dealt with my insurance adjuster directly and I didn't have to translate a single restoration term myself." — Marcus T.
"Appreciated getting real numbers each day instead of someone just saying 'looks good' and packing up." — Priya S.
"They worked overnight so our restaurant wasn't closed longer than it had to be. That mattered a lot to us." — Aaron W.
"They handled a blackwater situation in our basement without making me feel like it was a bigger disaster than it was." — Lena G.
"What they quoted up front is what I paid. No hidden equipment fees." — Sam O.
Because our equipment is staged inside Clovis, NM, most Clovis calls see a technician on-site within 60 to 90 minutes of the initial call.
Upfront, written pricing is standard on every Clovis job, not an add-on option.
Our Clovis on-call rotation covers water extraction, drying, and blackwater cleanup any hour of the day or night.
Yes, we document everything with photos and moisture readings and can communicate directly with your adjuster.
We rely on moisture meters and psychrometric readings, not a guess, before signing off on a Clovis job as complete.
Blackwater and sewage response is a core part of what our Clovis team does, not a job we sub out.
Cut power to the affected area if there's standing water near outlets, and avoid walking through it until our Clovis tech confirms it's safe.
Commercial response is a regular part of our Clovis work — restaurants, offices, and multi-unit buildings included.
Most Clovis residential jobs dry out in 3 to 5 days depending on how much material got wet and how long it sat before extraction.
Quick extraction and drying in Clovis significantly lowers mold risk, since spores need sustained moisture over roughly a day or two to establish.
Yes, if moisture readings aren't at dry standard when we finish, or a callback shows lingering moisture within 30 days, we return at no extra charge.
See the zip codes and nearby cities listed below — our Clovis crews cover that full radius.
Clovis is our home base, and our reach extends across Clovis, NM through a network of staged equipment and on-call technicians. If your address falls inside or near Clovis, a Hirex Water Damage crew can typically respond the same day.
— Embedded service-area map for Clovis, Clovis, NMReach our Clovis line directly and get a technician on the way today.
Call +1-844-234-5373